OxyCycler A44C 氧循環器A44C

有力的工具

氧循環器A44C是一個強大的研究工具，科學家誰做二氧化碳敏感的工作。它使復雜的二氧化碳剖面控制變得容易。

全范圍動態配置文件

使用這種動態二氧化碳控制器進行動物建模，以在0.1-20%的范圍內使用多個設定點控制二氧化碳分布。

在任何時間內保持任何設定點。任何兩個設定點之間的變化率是*可調的。循環任何外形任何固定次數，或連續。

在任何腔室工作

氧循環器A44C與Biospherix A-Chambers配合得非常好。然而，它可以工作在幾乎任何半密封的外殼。大的或小的。正方形或圓形。柔韌的或堅硬的制造的或定制的大多數腔室可以在幾分鐘內安裝完畢。

多室生產

用于動物建模的動態二氧化碳控制器可同時控制多達四個腔室。同時操作所有腔室，或獨立于其他腔室。控制不同的剖面，或每個腔室中的同一剖面。同時開始，或者在不同的時間開始。

控制是有效的

注入氮?dú)饣驂嚎s干燥空氣以降低二氧化碳。注入二氧化碳使其升高。室內二氧化碳傳感器的反饋告訴氧循環器A44C準確注入。不會浪費汽油！任何干擾都會被立即檢測和糾正。

操作簡單

一旦安裝和配置，就很容易了。每隔一段時間檢查一次校準，不要耗盡氣體。否則一切都是自動的！可以全年連續工作，也可以根據需要隨時工作。

OxyCycler A44C 氧循環器A44C

POWERFUL TOOL
The OxyCycler A44C is a powerful research tool for scientists who do CO2 sensitive work. It makes complex CO2 profile control easy.

FULL RANGE DYNAMIC PROFILES
Use this dynamic CO2 controller for animal modeling to control carbon dioxide profiles with multiple setpoints anywhere from 0.1-20%.

Hold any setpoint for any length of time. Rate of change between any two setpoints is fully adjustable. Cycle any profile any fixed number of times, or continuously.

WORKS IN ANY CHAMBER
The OxyCycler A44C works exceptionally well with BioSpherix A-Chambers. However, it can work with practically any semi-sealable enclosure. Large or small. Square or round. Flexible or rigid. Manufactured or custom made. Most chambers can be fitted in minutes.

MULTI-CHAMBER IS PRODUCTIVE
The dynamic CO2 controller for animal modeling controls up to four chambers at once. Operate all chambers simultaneously, or each independent of the others. Control different profiles, or same profile in every chamber. Start all at the same time, or each at different times.

CONTROL IS EFFICIENT
Nitrogen or compressed dry air is infused to lower CO2. Carbon Dioxide is infused to raise it. Feedback from the carbon dioxide sensor inside chamber tells the OxyCycler A44C exactly infuse. No gas is ever wasted! Any disturbances are immediately detected and corrected.

OPERATION IS SIMPLE
Once installed and configured, it’s easy. Check calibration once in a while and don’t run out of gas. Otherwise it’s all automatic! Can work continuously year round, or on occasion as needed.