高溫鼓風干燥箱zui高溫度 500?C烘箱,可供各種試品置入使用.適用于烘焙、干燥、熱處理及其它加熱,工業上或實驗室都可使用。(但不適用于發揮物的物品置入干燥箱,以免引起爆炸)。
高溫鼓風干燥箱zui高溫度 500°C,可供各種試品置入使用.適用于烘焙、干燥、熱處理及其它加熱,工業上或實驗室都可使用。(但不適用于發揮物的物品置入干燥箱,以免引起爆炸)。
Uses:
The max temperature of the high temperature blast type drying oven is 500°C,For a variety of test materials placement.Suitable for baking, drying, heat treatment and other heating.It can be used both in industrial and laboratory.(But it does not apply to the place volatile matter in theoven, so as not to cause explosion).
高溫烘箱(500度)的產品特點:
Characteristics:
▲高溫電熱鼓風干燥箱由箱體、控溫系統、鼓風循環系統構成。
The high temperature electrothermic blast type drying oven consists of the chamber,temperature control system,the blast circulatory system.
▲箱體外采用冷軋鋼板制成,表面噴涂處理,內膽采用不銹鋼或鋼板制成。
The sheel adopts high quality cold rolled steel plates, the surface is with electrostatic spraying.The inner container adopts high quality stainless steel or steel.
▲內膽與外殼之間采用巖棉填充保溫。
It adopts the rockwool to stay warm between the inner container and the shell.
▲控溫系統采用微電腦芯片處理器。具有PID調節特性、時間設定、溫差修正、超溫報警等功能,控溫精度高、功能強。
The temperature control systemadpotsmicrocomputersingle-chip technology, inligent digitaldisplay meter,withPIDregulation characteristics,setting time,modified temperature difference, over-temperaturealarm and other functions, high precision temperature control, strong function.
▲鼓風循環系統將熱量經風道送入工作室并強迫工作室內冷熱空氣的交換循環,從而提高工作室內溫度場的溫度均勻性。
Blast circulatory system puts the heat into the working room through the air funnel and force the exchange cycle of the hot and cold air in the working room, thereby improve the temperature uniformity of the working room temperature field.
▲按用戶要求在訂貨前可加置打印機和RS-485/232接口。485接口:800元;打印機:2800元;(適用于H型高溫烘箱)
We can also add printer and RS-485/232 interfaces before the order according to user requirements. 485 interface: 800 RMB; printer: 2800 RMB;(Apply to H type high temperature baking oven)
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。