Product Model: HZ
Use, the first container placed fixture, turn on the power to ON file, you can set the desired speed and timing.
Example: Set the oscillator to 150 per minute oscillation 5.5 child stop work.
1, the closure of the power switch, then displayed as the original rotational speed value. The running speed of the (last).
2 Press SET Form F-01 into the timing set. Press the SET button to enter the setup
Press ▲ ▼ to display a set to run regularly, such as the timing set to 0 (normally open) run.
3, and then press SET to confirm (should be dripping sound).
Exit, press "?" (-01)
5 Press ▲ show F-02 into the timing
Press SET to show the original length value (last timing length)
Press ▲ ▼ to display digital size change final choice of 5.5 (minimum resolution of 0.1 hours, 6 minutes).
Press SET to confirm (should be dripping sound). 5.5 hours from time to time been recognized.
6, and then press the "?" secondary exit the setting to display the value of raw speed.
Press ▲ ▼ to set the speed of 150
Press RUN to start the machine can slowly start until 150 rev / min. And stable operation of the 5.5 child stop and alarm 10 seconds prompt. The timing has finished running.
7 Press the STOP at any time to stop running.
8, the speed setting Press ▲ ▼ to set in a stopped state.
9, POW power indicator, ALM fault light, RUN to run lights STOP as stop lights. The corresponding indicator controller for the corresponding state.
The Changzhou KPS experimental Instrument Co., Ltd.
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。