ISO 14130 玻纖增強塑料的剪切強度的測試方法
ISO 14130 Fibre-reinforced plastic composites —Determination ofapparent interlaminar shear strength by short-beam method
ISO 14130 玻纖增強塑料(玻璃鋼)的剪切強度的測試方法簡介:本標準規定了用短梁法確定玻纖塑料的表觀層間剪切強度的過程。
ISO 14130 Fibre-reinforced plastic composites —Determination ofapparent interlaminar shear strength by short-beam method Scope:This International Standard specifies a procedure for determining the apparent interlaminar shear strength of fibre-reinforced plastic composites by the short-beam method
ISO 14130 玻璃鋼剪切強度測試的其他相關標準:
ISO 527-4塑料拉伸性能的測定
ISO 527-4 Plastics -Determination of tensile properties
ISO 14125 玻纖增強塑料(玻璃鋼)的彎曲性能的測試
ISO 14125 Fibre-reinforced plastic composites--determination of flexual properties
關鍵詞:玻璃鋼剪切強度,玻璃鋼彎曲性能,塑料拉伸性能,表觀層間剪切強度
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。