PV3907 紡織品刷磨耗試驗

1范圍：該測試規范描述了用于測試樣品和系列監測測試的紡織品的刷磨損的程序。

2要求：根據圖紙和/或TL標準

  測試過程

測試儀器：旋轉磨機（Frank）

樣品尺寸：100cm2

磨損區域：約50cm2

樣品曲率：10mm

負載：10N

轉數：1000

刷毛高度：16.4mm

刷毛厚度：0.4mm

每束刷毛：48±2

把柄：90x120mm

捆綁間距：8mm

刷毛材料：PA6

行：11

在每1000次旋轉之后，刷子應使用壓縮空氣清潔雜質。

3.1刷子的供應來源

Kullen  Gmbh&Co

Am Heibrunnen83

72766 Reutlingen

Telephone +49 (0)7121 142-0

F +49 (0)7121 142-260

ABRASION TESTER (Design SCHOPPER)

This apparatus evaluates and measures resistance to wear and tear on varieties of textile materials

(woven and knitted fabrics, etc.) according to DIN 53863, Part 2, GME Standard 60345, GMW Standard 3283 and

VW/Audi Zentral-Norm PV 3908.

The ABRASION TESTER described as follows guarantees a testing method that gives the possibility of determining reliably the resistance to wear and tear. This method consists in that the different sectors of a circular sample of the material to be tested, are successively and intermittently, put into contact with and moved across a loaded abrading face, whereby the sample surface is worn by the abrader. The rotary

movement of the test specimen is arranged at definite intervals, so that the sample is tested in two directions.

The clamping head allows of clamping reliably even very thick samples and moreover is so arranged that, by using under similar initial tension. This is of essential importance as the test result depends upon the stretch of the sample. For fixing the sample the clamping head can be taken off the machine and inserted into a special ringspanner which facilitates this operation. The abrader head is balanced by a counterweight. The compression effect for the abrading operation is produced by placing loading weights on the abrader head. Siliciumcarbid-emery paper has proved to be a very convenient abrasive. For fastening, the strip of emery paper is used for

each test in order that the testing conditions may be uniform.