JT6410A Programmable Electronic Load

JT641x/JT641xA系列電子負載，在JT63xxA系列高性能電子負載的基礎上，增加了多種快充協議的支持，方便了用戶對快充產品的測試。同時，借助500KHz高速同步采樣及DSP技術，全面加強瞬態測試以及多方位的智能分析，并全面整合到自動測試功能，特別適用于電源及相關行業的量產與來料檢測；而可編程電流上升率、高速動態帶載及可編程序列功能，亦可以滿足大部分的研發需要。

Features：

★ Support USB PD2.0 / PD3.0 / QC 2.0 / QC 3.0 / QC4.0+ / PE+ / PE+ 2.0 / FCP / SCP /

AFC / VOOC protocol。( JT641x no support FCP / SCP / AFC / VOOC)

★ 500KHz synchronous sampling with 10Hz，10uA，0.1mV stable resolution.

★ Support the measurement of ripple voltage/current ripple (Vpp/Ipp), peak

voltage/current (Vp+/Ip+) and valley voltage/current (Vp-/Ip-)

★ Support CC, CV, CP & CR mode

★ Support accurately simulating LED electronic load loading.（JT6410 / JT6410Awithout

this function）。

★ Support CP & CR mode when in CV/CC source and support CV/CC source detecting

and matching when in CR mode.

★ Support up to 50KHz dynamic loading mode and peak voltage (Vp+) and valley voltage

(Vp-) measurement。

★ Support over current protection test (OCP) and maximum power point capture (Pmax)

★ Support load effect measurement.

★ Support high-speed dynamic frequency sweep function.。

★ Support timing measurement。

★ Support over voltage protection test

★ Built-in waveform generator. In list mode, different waveforms can be simulated.

★ Support short-circuit analog function.

★ Support automatic test (A-test) alone.

★ Support battery resistance and battery capacity test.

★ Support remote sensing.

★ Support Von and Voff function.

★ Shortcut supports 20 groups of data storage and read.

★ High-luminance & full view graphic dot matrix screen.

★ Over current, over voltage, over power, over temperature, polarity reversed protection

★ Intelligent fan system. Fan will be automatically initiated according to the temperature.

★ Support external trigger input and output.

★ Standard RS232 interface.

★ Support current waveform output monitoring.

★ Standard SCPI protocol.