SKC環氧乙烷采樣器廣泛的測試和記錄，研究報告的20個化合物。SKC已經科學驗證的575系列采樣器的采樣率以及其他關鍵的采樣參數滿足OSHA標準/標準的要求。
SKC環氧乙烷采樣器
環氧乙烷是廣泛用于消毒的醫療設備和用品，暴露的健康影響可能從呼吸道癌癥和生殖/致突變作用范圍。
SKC環氧乙烷采樣器功能特點：
- 高度準確和可靠：在實驗室和現場得到廣泛驗證。
- 節省時間和金錢
- 使用相同的吸附劑為活性OSHA方法1010
- 經濟的溶劑解吸，氣相色譜分析
- 選擇合適的吸附劑就沒有反擴散
- *的收集效率
- 該吸附劑具有較大的比表面積高容量
- 采樣器包含> 300毫克的材料比其他品牌更
- 采樣的靈活性
- 美國SKC采樣器結果證明簡單易用，無需培訓或采樣泵
- 符合ASTM和ANSI / d6246-08 ISEA 104—1998（R 2009）標準
- 確定為可行的替代七OSHA方法取樣
英文資料：
Ethylene Oxide Passive Samplers
Ethylene oxide is widely used to sterilise medical equipment and supplies. Exposure health effects can range from respiratory irritation to cancer and reproductive/mutagenic effects. SKC has scientifically validated the sampling rate of the 575 Series passive samplers along with other critical sampling parameters to meet OSHA/ASTM/ANSI requirements.
- Highly accurate and reliable
- Proven performers in the laboratory and in the field
- Save time and money
- Uses same sorbent as active OSHA Method 1010
- Economical solvent desorption and GC analysis
- Proper sorbent selection means no reverse diffusion
- Superior collection efficiency
- SKC sorbents have a larger surface area for higher capacities
- Samplers contain >300 mg of sorbent — much more than other brands
- Sampling flexibility
- Validated for short-term and 8-hour sampling
- Proven results
- Extensively tested and documented
- Research reports for 20 compounds available
- So easy to use - No sampling pump or training required
- Meets ASTM D6246-08 and ANSI/ISEA 104-1998(r 2009) standards
- Identified as viable alternative to active sampling in seven OSHA methods
9
