13380184263
提供商
東莞市廣聯自動化科技有限公司資料大小
288.4KB資料圖片
下載次數
2次資料類型
PDF 文件
瀏覽次數
267次Cat Pumps泵的維修銷售表下載
Pump Manifold or Fluid-End
Pressure Regulating Unloader Valve - Used to set and maintain consistent system pressure. Rotate clockwise to increase pressure or counterclockwise to decrease pressure.
Pump Inlet Port/Garden Hose Fitting
Chemical Injector
Inlet Auxillery Port - Used for additional accessories such as an inlet filter or thermal valve.
Drain Plug - Drain plug and oil filler cap can be switched to mount the pump 180 degrees.
Oil Sight Gauge - Oil level should be in the middle of the sight gauge when the pump is not in operation.
Oil Filler Cap
Pump Drive-End/Crankcase
Pop-Off/Relief Valve - Used for secondary protection against over-pressurization.
Thermal Valve - Used on closed loop by-pass lines to recycle water in event of excessive heat.
Pressure Gauge - Used to accuratley monitor pump pressure.
Inlet Filter - Used to capture and prevent contamination particles from entering and possibly causing damage to the pump and system components.
By-Pass Hose - Used to route pump flow from unloader back to pump inlet when system is running in bypass.
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
