您好, 歡迎來到化工儀器網
| 產地類別 | 國產 | 價格區間 | 面議 |
|---|---|---|---|
| 儀器種類 | 管式爐 | 應用領域 | 醫療衛生,環保,食品/農產品,化工 |
產品簡介
詳細介紹
1600℃雙溫區管式爐主要特點Main features:
1) Control each heating zone individually, can get several different thermal fields or long constant zone
每段獨立控溫，能得到多段不同的溫場，或可得到超長恒溫區。
2) With mature technology, high quality, uniform thermal field, rational construction
該設備技術成熟，質量可靠，溫場均勻，結構合理。
3)Widely used for CVD experiment, fluorescent powder preparation, high tem. Experiment environment, for example, vacuum or atmosphere sintering, substrate coating
廣泛應用于CVD實驗，熒光粉制備，真空或氣氛燒結，基片鍍膜等實驗環境。
1600℃雙溫區管式爐技術參數Technical Parameters：
Power 輸入電源 | Power rated:11KW (220V) 額定功率：11KW (220V) | ||||
Voltage 電壓 | Voltage rated: AC220V 50/60HZ 額定電壓： AC220V 50/60HZ | ||||
Working Temperature 工作溫度 | Max. Temperature: 1600℃( 1 hr) 最高溫度：1600℃ (1小時) Continuous working temperature: ≤1550℃ 持續工作溫度：≤1550℃ Recommended heating rate: below1400℃≤10℃/min,1400-1600℃，≤5℃/min 推薦升溫速率：1400℃以下，≤10℃/分;1400-1600℃，≤5℃/min | ||||
控溫方式 | PID automatic control and auto-tune function. 模糊PID控制和自整定調節 30 programmable segments for precise thermal processing. 智能化30段可編程控制 Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 | ||||
Length of heating zone 加熱區長度 | 760mm | ||||
Length of constant zone 恒溫區長度 | 500mm | ||||
Heating Elements 加熱元件 | MoSi2 rod 硅鉬棒
| ||||
Temperature Accuracy 控溫精度 | +/- 1℃ | ||||
真空法蘭 | clamp flange and folding flange denpends on the diameter of tube 根據管徑不同，法蘭分為卡箍和折頁兩種.
| ||||
Vacuum Pressure 真空壓力 | 133torr can be achieved by mechanical pump 機械泵可達133torr（1pa） 10^-6 torr can be reached by molecular pump 分子泵可達10^-6torr（10^-3pa） Please click the picture below to order vacuum pump 點擊下列圖片訂購真空部件
| ||||
Warranty 質保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） | ||||
Warning 注意事項 | Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 | ||||
Compliance 認證 | CE Certified CE認證 The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 可付費進行TUV(UL61010)或CSA認證
| ||||
Operation instructions 操作指導 |
Click to download the operating manual 點擊下載說明書 |
其他推薦產品
更多產品-
面議
-
面議
-
面議