您好, 歡迎來到化工儀器網
產品分類品牌分類
-
兆歐表 高斯計/磁通計/特斯拉計 漏電開關測試儀 接地電阻測試儀 絕緣電阻測試儀 相序表 真空表 射頻/通用頻率計數器/計時器 電容表 毫微微安計/皮安計/靜電計/高阻計 加速度測試儀 固相萃取裝置 射線檢測儀 微波漏能檢測儀 流量計 溫度校準儀 壓力表/壓力計 音頻分析儀 LCR表 數據采集器 功率計 頻譜分析儀 毫伏表 自動失真測試儀 直流微歐姆計 萬用表/鉗形表 交流電源 開關直流電源 線性直流電源 信號發生器/信號分析儀 示波器 安規測試儀 直流電阻測試儀 變壓器綜合測試儀 電橋 中國臺灣固緯 日本三和 美國福祿克 日本共立 其它
產品簡介
詳細介紹
ERICHSEN 435S附著力測試儀
Method of Operation
After checking the tight fixing of the test body at the
end of the load transmission bolt, the required force
is adjusted on the scale using the locking screw
slider. Then the Model 435 S is placed
perpendicularly onto the surface to be tested resp.
beside the applied raised coating to be tested, and is
pressed down so that the guide wheels touch the
surface. In this way the preset force acting upon the
test disc is fully effective on the test surface. The
instrument is now moved into the rolling direction the
wheels over the specimen to be tested e.g. against,
for example, scale lines.
As the diameter of the test head of Model 435 S is
considerably smaller compared with the steel disc of
Model 435, a central sector of the disc of Model 435
has been chosen as test body for reasons of space
saving. The test body is mounted on a bolt and is
preloaded by an internal helical spring to a force
adjustable from 0 to 20 N. When placing Model 435 S
with the two guide wheel perpendicularly onto the
surface, the rigidly arrested test body acts （with the
preset force） upon the surface. The test force can be
varied – as for Model 435 – by means of 3
exchangeable springs covering three different test
ranges.