成人做爰免费视频免费看_成人a级高清视频在线观看,成人a大片在线观看,成人a大片高清在线观看,成人av在线播放,一a一级片,一级黄 中国色 片,一级黄 色蝶 片,一级黄色 片生活片

Nominal Cell Constant （K） = 0.5, 3/4 inch NPT Kynar （PVDF） Compression Fitting, 7m （23 ft） Digital Cable, Titanium Electrode

High Performance Design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place （CIP）, and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant （Hach’s easy DRY-CAL™ method） when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and Conductivity Measurement Capability

These enhanced performance sensors measure from theoretically pure water （0.057 µS/cm or 18.2 MΩ） up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.

Versatile Mounting Styles

Compression fitting sensors feature titanium electrodes and a compression fitting for universal installation with up to 4 inches （102 mm） insertion depth. The 1/2-inch or 3/4-inch male NPT compression fittings are offered in Kynar® （PVDF） or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor from the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 7 inches （178 mm）.

Full Featured “Plug and Play” Hach sc Digital Controller

There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

What's in the box

Includes: sensor with 23 ft cable and manual

Specifications

Accuracy:± 2 % of reading above 200 µS/cm

Cable Length:Standard Probe Cable Length （integral）Digital Probe: 7 m （23 ft.）

Operating Temperature Range:-20 to 200 °C

Pressure Limit:0 to 300 psi （20.7 BAR）

Repeatability:± of reading

Response Time:90 % of reading within 30 seconds of step change

Temperature Compensation:Temperature Compensator: Pt 1000 RTD

Temperature Measurement:-20 to 200 °C （–4 to 392°F）

Transmission Distance:1000 m （3280 ft.）, maximum when used with a termination box