成人做爰免费视频免费看_成人a级高清视频在线观看,成人a大片在线观看,成人a大片高清在线观看,成人av在线播放,一a一级片,一级黄 中国色 片,一级黄 色蝶 片,一级黄色 片生活片

Even the smallest oil traces can impair water quality. The FP 360 sc is specifically designed to detect traces of mineral oils in water while providing the necessary value and benefits for a positive return on investment. Monitors surface water, process water and industrial water continuously. Has submersible probe design. No tubes, pumps or valves - simply wipe off the sensor's measurement window. Calibrate once every two years. Available in stainless steel or titanium.

• Lowest Cost of Ownership
• The Right Technology for the Right Price
• Minimal Maintenance
• Reduced Laboratory Testing
• High Sensitivity and Selectivity

  Lowest Cost of Ownership

  The FP 360 sc is specifically designed to detect traces of mineral oils in water while providing the necessary value and benefits for a positive return on investment.

  The Right Technology for the Right Price

  Due to its unique combination of submersible probe design and UV fluorescence sensing technology, the FP 360 sc delivers the best technology to detect oil in water and is priced below competitive UV fluorescent instruments.

  Minimal Maintenance

  The FP 360 sc has no tubes, pumps, or valves that can foul or require constant maintenance interventions. Maintenance is limited to occasional wiping of the sensor's measurement window, calibration once every two years, and Xenon lamp replacement every four years.

  Reduced Laboratory Testing

  While laboratory testing is the ultimate method of measuring oil in water, it is a long and complex process that requires special equipment and trained lab personnel. The FP 360 sc provides a cost-effective, continuous online monitoring solution to maintain process control and avoid oil contamination with minimal laboratory testing.

  High Sensitivity and Selectivity

  The FP 360 sc can detect and measure polycyclic aromatic hydrocarbons （PAHs） from 1.2 ppb to up to 5000 ppb （µg/L）. This is approximay equivalent to a concentration of mineral oil between 0.1 to 150 ppm （mg/L）. Furthermore, the FP 360 sc method of detection makes it impervious to interferences by turbid water or natural organic and biological matter that impact online light scattering, UV absorbance, and VIS fluorescence instruments.

  What's in the box

  Oil-in-water probe, user manual

  Specifications

  Ambient Temperature:-5 °C to 45 °C （23 °F to 113 °F）

  Cable Length:1.5 m （4.9 ft） - 40 m （130 ft） max

  Calibration:Factory calibrated with UV fluorescence standard or process calibration with results of a grab sample analysis.

  Detector:UV photodiode with interference filter; Compensation of daylight and flashlamp intensity fluctuations

  Dimensions （D x L）:2.68 in x 12.24 in （68 mm x 311 mm）

  Excitation:254 nm

  Light Source:Miniature xenon flashlamp with interference filter

  Material:Housing: Stainless steel 316Ti （1.4571）

  Measurement Method:UV fluorescence method for polycyclic aromatic hydrocarbons （PAH）

  Pressure Limit:Max. 30 bar or 435 psia （measurement probe）

  Protection Class:IP 68

  Range:High Measuring Range 0.1 to 15 ppm （mg/L） （oil） or 0 - 500 ppb （µg/L） （PAH） based on calibration standards

  Reproducibility:2.5 % of measured value at constant temperature

  Resolution:0.1 ppb （µg/L） （PAH） in the lowest measuring range

  Response Time T90:10 s

  Sample Temperature:1 °C to 40 °C （33.8 °F to 104 °F）

  Storage Conditions:-40 °C to 60 °C

  Weight:Stainless Steel: 6.17 lbs. （2.8 kg）