海綿泡沫切割機-實驗室型

海綿泡沫切割機型號：GCPQ-100

一、主要適用范圍及功能

海綿泡沫切割機本機主要用于泡沫材料的切割，其可將硬質泡沫、軟質泡沫、塑料切割成方形、長方形、條形等，具有切割效率高，切割尺寸準確，精確度高等優點。

==========================================================

二、海綿泡沫切割機主要技術要求：

1、切割顯示分辨率：0.01mm

2、切割尺寸精度：±1mm

3、工作臺尺寸：1000×700mm（可根據用戶需要而定）

4、可移動工作臺有效行程為 500mm

5、zui小切割尺寸：25×25×10mm

6、zui大試樣厚度：250mm

7、電源電壓:220V

8、功率： 2.2KW

================================================================

三、海綿泡沫切割機結構特點：

1、該機配有可移動切料調正尺寸裝置。為保證切料尺寸精度，配有數字顯示尺。

2、可移動工作臺，采用負壓吸附方式，固定被切割泡沫。

3、停止運轉時，配有手動、自動裝置。

4、紅色剎車按鈕用于手動剎車。當啟動按鈕按下時此按鈕無效

5、當剎車電磁鐵吸合時，按下啟動按鈕，剎車電磁鐵立即釋放。

=======================================================================

四、海綿泡沫切割機設備主要配置

1、試驗主機一臺

2、控制系統一套

3、吸附裝置一套

4、數顯標尺一個

5、驅動電機一個

6、切割刀一片（增配一片）

7、磨刀砂輪片一片

8、吸塵裝置一套

===================================================

親：

1.可免費為客戶檢測試樣；

2.可以根據不同客戶的需求開發標準和非標準產品。

3.售前，我們專門派技術人員為您設計*的流程和方案；

4.售后，將免費指派技術人員為您調試安裝；

5.保修一年，產品終身維護；

北京冠測試驗儀器有限公司專注于試驗方法的創新及應用，是集研發、生產、銷售、售后于一體的專業試驗儀器供應商！

咨詢洽談業務!

親，請繼續參閱英文資料

Sponge foam cutting machine - Laboratory

Sponge foam cutting machine model: GCPQ-100

One, the main scope and function

Sponge foam cutting machine this machine is used for cutting the foam material, it can be hard foam, soft foam, plastic cut into square, rectangular, strip, with high cutting efficiency, cutting size is accurate, the advantage of high precision.

======================================================================

Two, sponge foam cutting machine main technical requirements:

The 1, cutting the display resolution: 0.01mm

2, the cutting precision: ± 1mm

3, table size: 1000 x 700mm (according to user required)

4, can be effective stroke moving table 500mm

5,the minimum cut size: 25 x 25 x 10mm

6, the maximum thickness: 250mm

7, the power supply voltage: 220V

8, power: 2.2KW

========================================================

Three, sponge foam cutting machine structure features:

1, this machine is equipped with a removable blanking device is size. In order to ensure the dimension precision blanking, equipped with digital display.

2, movable worktable, adopts the negative pressure adsorption method, fixed by cutting foam.

3, stop, equipped with manual and automatic device.

4, the red brake button to manually brake. When the start button press this button is invalid

5, when the brake electromagnet suction fit, press the start button, brake electromagnet released immediay.

========================================================================

The four major configuration, sponge foam cutting machine equipment

1, test host

2, a set of control system

3, a set of adsorption device

4, digital display scale one

5, a drive motor

6, a cutting knife (do)

7, grinding wheel piece a piece

8, dust collection device