QQ交談
您所在位置：> 請輸入產品關鍵字：
郵編：518033
聯系人：付先生
電話：0755-83986300/0755-83980158
傳真：0755-83980158
手機：13802268624
留言：發送留言
個性化：www.lp-17.com
網址： www.gdojbk.com
商鋪： http://www.js967.com/st118675/
112AL濕膜梳-112AL濕膜梳│易高Elcometer│112AL沖壓鋁制濕膜測厚儀
- 發布日期：
- 有效日期：
- 所 在 地：
- 產 地：
- 已獲點擊：
- 2025年6月12日
- 2025年12月13日
- 廣東深圳市
- 易高Elcometer
- 302次
【產品簡介】
【詳細說明】
如有任何問題請與我司業務專員：
：豪
:fuhao@17Lp.com
英國易高Elcometer 112AL沖壓鋁制濕膜梳
這些沖壓鋁制濕膜梳成本低，用于測量濕膜厚度。
由于是用鋁材料沖壓而成，故精確度不如P.126的高精度測量儀。
每包共有10片濕膜梳，每片上一面為公制量程（25~3000μm），另一面為英制量程（1~118mils）。
ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.
Wet film combs have teeth of various lengths on their sides.
Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.
The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value Example In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou. If the volume to solids ratio of the coating is known （if not contact the coating manufacturer） then the wet film thickness can be used to predict the dry film measurement. To use combs on pipes, measure along the longitudinal axis （lengthways） of the pipe. On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.
| 符合以下標準 | |
| ASTM D 4414-A | BS 3900-C5-7B |
| ISO 2808-7B | NFT 30-125 |
| 型號 | 分類 | 量程 | 零件號 |
| Elcometer 112AL | Elcometer 112AL沖壓鋁制濕膜梳（x10） | 25~3000μm1~118mils | B112AL12473-3 |
Elcometer 112AL沖壓鋁制濕膜梳
How to use a Wet film Comb - Elcometer Wet Film Measurement