深圳電解電容有限公司
◆◆◆◆◆電容需求接入:
◆ 36933700
36944446
33536680
◆
◆www.ydkcn.com
www.yadikey.com
www.u-con.net
http://ydkcn.jimdo.com
www.ydk-u-con-rubycon-chemi-con-nichicon-cde-bhc-elna-epcos-hitachi.com
◆：631501521
 ◆www.ydkcn.com◆www.yadikey.com◆www.u-con.net◆http://ydkcn.jimdo.com
◆www.ydk-u-con-rubycon-chemi-con-nichicon-cde-bhc-elna-epcos-hitachi.com
海外主要客戶：ABB、日本力士集團=http://www.luxman.co.jp
大陸：三星中國、正泰電器、山東大學、天津大學下屬合作單位。
以下螺栓電解電容，全新品，綜下所述，歡迎參觀工廠，歡迎看廠。

產品系列（Products Series）：    CD289鋁電解電容     
產品規格（Products specification）：400V1000uF  -20~+20%
產品殼號（Products Case）：  35*60
85℃（大陸標準2000H）產品  實測zui大值4000H    
（保證值約40000H）  40℃溫度下保證值：10年
（實測zui大89200H） 40℃壽命16年=16*365*24H
● 鋁電解電容器使用說明 Notes for use of aluminum electronic capacitors
1.在電器回路不清楚或不明確線路之極性時，則建議使用無極性電解電容器。 1.lf circuit polarities are uncertain, Non-polar capacitors are recommended.
2.無極性（或二極性）電解電容器，可使用在極性轉換的回路或直流回路上。 2.Non-polar （or Bi-polar） capacitors can be used in polaritiy- changing circuits or DC circuits.
3.單極性電解電容器只能使用在直流電路上，其極性必需標明在適當之位置或在導針/端子之旁邊。 3.Polarized capacitors can be used in DC circuits only. Its polarity must be marked on the proper side of wire/terminal.
4.電解電容器應儲存于低溫及干燥之處所。 4.Capacitors should be stored at a place of cool and dry.
5.電解電容器不可使用在周圍溫度超過標示之使用溫度范圍。 5.Capacitors cannot be used in a place of ambient temperature exceeding its marked temperature.
6.電解電容器不適用于超過可容許紋波電流范圍之回路之上，假如有需要耐高溫紋波電流之電解電容器，請與我們洽商詳情 6.Capacitors cannot be used in a circuit where ripple current exceeds its allowed range. Please contact us if you have requirement for high temperature and ripple current capacitors
7.電解電容器經*儲存，如果漏電流超出規格值，使用前應以額定電壓重新再老化30~60分鐘。 7.lf capacitors have been stored for a long time and its leakage current exceeds the specified value, please recharge for 30 to 60 minutes with rated voltage before using.
8.電解電容器一般品不適用于驟然間之充放電，如需使用在快速充放電的場合，請與我們洽商。 8.Capacitors cannot be used in a circuit charge or discharge, lf use in a circuit of sudden charge is required, please contact us.
9.使用于電解電容器之工作電壓，
不得超過額定電壓。 9.Application of working voltage to capacitors should not exceed its rated voltage.
10.為了保護電解電容器之內部結構，其導針或端子不容許過分之拉力或承受的拉力，請參考JIS C 5102。 10.ln order to protect the internal structure, ydcon capacitors cannot be applied with over pull-force. Please refer to JIS C 5102.
11.電烙鐵應與電容器塑膠套管保持適當距離，以防止過熱造成塑膠套管破裂。 11. Soldering iron should be kept in a suitable distance from vinyl sleeve of capacitor in order to avoid sleeve crack.
12.電解電容器經波峰焊錫之程序，其焊錫槽之溫度不容許超過260℃±10℃，時間10秒鐘。 12.For peak soldering , the solder temperature should not exceed 260℃±10℃ for 10 seconds.
13.為了保護塑膠套管、印刷標示以及封口材料不被破壞，電解電容器不得以滷化化學藥品或類似溶劑，作為電解電容器洗滌之用，如三氯乙烯、二甲苯類或酮類等。 13.In order to protect PVC sleeve, printed marks and sealing material, capacitors can not be cleaned with  halogenated chemicals or similar solvent such as trichlorethylene, Xylene or Acetone, etc.
14.本公司一般規格之電解電容器，其品質依照JIS C 5141 標準。 14.Quality of our capacitors is in accordance with JIS C 5141.
15.本公司之信賴性試驗方法，JIS C 5102 標準。 15.Reliability test methods for our capacitors are
in accordance with JIS C 5102.
16.本公司在生產過程中不使用破壞臭氧層之藥品。 16.None of Ozone Depleting Chemicals （ODC） is used in any manufacturing processes of yadacon Company.