中國臺灣可程式耐腐蝕試驗箱

中國臺灣可程式耐腐蝕試驗箱 其余產品規格
規格型號          實驗空間（W*D*H）      外箱尺寸（W*D*H）
SH-60             600*450*400mm          1075*630*1100mm
SH-90             900*600*500mm          1415*885*1285mm
SH-120           1200*1000*500mm         1900*1200*1400mm
SH-160           1600*1000*500mm         2300*1200*1400mm
SH-200           2000*1000*500mm         2700*1200*1400mm

可根據客戶特別要求，訂制非標產品。

三 zui大耗電量：AC 220V 單相3KW 50/60HZ

四 試驗溫度：
依CNS JIS ASTM GB2423.19規格，可設定式恒溫控制
A  鹽水噴霧試驗：NSS，ACSS
1、試驗室：35℃ ± 1℃
2、飽和空氣桶：47℃±1℃
B  耐腐蝕試驗：CASS（醋酸銅）
1、試驗室：50℃ ± 1℃
2、飽和空氣桶：63℃ ± 1℃

材質：
a、試驗室採用P.V.C聚氯乙稀板，耐高溫
b、試驗室密封蓋採用PVC耐衝擊板
c、試藥補充瓶採用隱藏式附水位表，清洗容易，不易破裂（氣壓缸自動開閉）
d、飽和空氣桶採用SUS#304不銹鋼耐高壓桶保溫效果*
e、試驗室蓋架採平面分度架，可任意調整角度，四面落霧及受霧方面**，試藥片放置數量多
 

ISO 9227-2006 人工氣候腐蝕試驗 鹽霧試驗

  The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75% of the member bodies casting a vote.

  Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.ISO shall not be held responsible for identifying any or all such patent rights.

  ISO 9227 was prepared by Technical Committee ISO/TC 156,Corrosion of metals and alloys,in collaboration with ISO/TC 35,Paints and vamishes,Subcommittee SC 9, General test methods for paints and vamishes, and ISO/TC 107,Metallic and other inorganic coatings, Subcommittee SC 7, Corrosion tests.

  This second edition cancels and replaces the first edition （ISO 9227:1990） and ISO 7253:1996, which have been technically revised.

  Introduction
  There is seldom a direct relation between resistance to the action of salt spray and resistance to corrosion in other media, because several factors influencing the progress of corrosion, such as the formation of protective films, vary greatly with the conditions encountered. Therefore, the test results should not be regarded as a direct guide to the corrosion resistance of the tested metallic materials, in all environments where these materials may be used. Also, the performance of different materials, during the test should not be taken as a direct guide to the corrosion resistance of these materials in service.