淋雨試驗箱 rain simulation test chamber 型號：LY-08000工作室尺寸： D3000*W2000*H2000mm Type: LY-080 00working room dimension: D2000*W2000*H2000 特點 采用瑞士Bystronic 集團AFM公司的數控成套加工設備加工（含數控剪板機、數控液壓折彎機、32 工位塔沖床等） 采用瑞士Bystronic集團激光切割機數控加工設備加工 采用德國Wagner全自動靜電噴塑流水線數控設備加工 采用“阿克蘇”塑料粉末噴涂加工 Rain simulation test chamber: Test space volume: 2000*2000*2000mm; The intensity of the rain: adjustable up to 20mm/min.; Spray with any one side or together with the four sides and top at an angle of 40-45 degrees. Temperature range of sprayed water: should be lower than the temperature of the specimen for 5…10C; Door: 2000*2000mm; Turntable for the test specimen; 二、箱體結構 structure 1、試驗箱為單層SUS304不銹鋼板，外殼表面進行拉絲發紋處理，內膽為優質不銹鋼2B板。 Single-layer SUS304 stainless sheet, with drawing hairline treatment in the surface. Superior stainless steel 2B for the interior 2、噴水管也采用不銹鋼制造；噴嘴可調；atomizer is made by stainless steel; adjustable atomizer 3、工作室及其它所有接觸水的部位均采用不銹鋼或銅質材料。Working room and all parts that contract with water are made by stainless steel or copper material. 三、控制系統 control system 1、 調速裝置：擺管及轉盤調速均采用進口變頻器。Speed adjustment device: the speed adjustment for swing pipe and rotation plate is realized by imported inverter 2、 主要配置：儲水箱、水泵、減壓分流裝置、壓力記、流量計、噴水管組件、擺管擺幅驅動機構、工作臺旋轉機構、電器控制系統、可視鋼化玻璃門、玻璃刮水器、減速機構等。 2.Main configuration: water storage tank, water pump, pressure reduction fluid diversion ,pressure regulator, flow meter, atomizer fit, swing pipe driving system, working table rotation system, electrical control system, visual tempered glass, speed reduction system 四、安裝調試：installation and calibration 供方負責安裝調試操作介紹（直到需方員工獨立操作為止）；