SKC階梯式個人采樣器
- 公司名稱 上海京工實業有限公司
- 品牌 New Cosmos/日本新宇宙
- 型號
- 產地 美國SKC
- 廠商性質 代理商
- 更新時間 2017/2/6 12:00:21
- 訪問次數 1488
聯系方式:閔經理15021182199 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息,謝謝!
德?tīng)柛駢嚎s空氣檢測儀,加拿大BW四合一氣體檢測儀,華瑞VOC氣體檢測儀,美國SKC采樣器,匹磁在線溶氧儀,自增壓液氮灌,GE德魯克,哈希濁度儀,德?tīng)柛駳怏w檢測儀,美國TIF
SKC階梯式個人采樣器
美國SKC五級個人采樣器sioutas通過撞擊和分離空氣中顆粒,把顆粒分為:>2.5um,1.0-2.5um,0.50-1.0um,0.25-0.5um和<0.25um,當使用PTFE過濾器,sioutas沖擊器是高效收集顆粒不影響油脂或底涂層的使用,保留大小分級不穩定化合物的化學分析。
SKC階梯式個人采樣器性能參數:
一、精確顆粒分離:
Precise particle separation
1、顆粒切割點“2.5um,1.0um,0.50um和0.25um
1particle size cut-points:2.5um,1.0um,0.50um,and 0.25um
2、采集同時,把有效樣本分成粗,細,超細顆粒。
2The only personal impactor that efficiendy samples coarse,fine,and ultrafine particles simultancously
3、即使在高濃度顆粒的情況下也能保持高的收集效率
3Maintains high collection efficiency even at high particle concentrations.
二、優化l流速9L/Min。降低24小時采樣壓力。
Optimized at a 9L/min flow rate with low pressure drop for 24-hour sampling
1提高了分析的靈敏度。
improves analytical sensitivity。
2zui大限度減少非檢測樣品的影響。
minimizes non-detectable samples.
三、保留不穩定化合物。
Preserves unstable compounds
1化學惰性收集基板。
Chemically inert collection substrate
2油脂樣品不堵塞污染。
No impaction grease to contaminate sample
四、減少粒子反彈和損失
minimal particle bounce and internal wall losses.
五、適用于室內外采樣
suitable for indoor and outdoor sampling
六、粒子分級樣品可以用化學和微觀分析。
size-fractionated samples can be analyzed gravimetrically,chemically,and microscopically
七、體積小,重量輕
small and lightweight
八、適合個人和區域采樣。
suitable for personal or area sampling
美國SKC階梯式個人采樣器訂貨號:
Description | Pack Size | Part Number |
Sioutas Personal Cascade Impactor | Each | 225-370 |
Replacement Collector Plates, set of 4 | Each | P55016 |
Retainer Rings only | 4 | P20151 |
Replacement O-ring, Retainer, and Spacer Set for Sioutas Impactor includes: 4 filter retainer rings, 9 O-rings, and 1 PTFE spacer ring | Each | P51917 |
After-filter, 37 mm PTFE ‡ †, 2.0 µm, optional | 50 | 225-1709 |
Collection Substrate (filter for 4 stages), 25 mm, PTFE ‡, 25 mm, 0.5 µm pore, required | 100 | 225-2708 |
‡ Back pressure on PTFE filters can vary within the same lot.
† The maximum operating temperature for PTFE filters with PMP support ring is 464°F (240°C).