Features 特點

• One-test-chamber-design
• 單試驗空間設計
• High stiffness construction, precision aligned
• 高剛度結構，精密對中
• Movable upper crosshead
• 可移動使十字頭上橫梁
• Grounded and chromium plated column
• 立柱經過接地和鍍鉻處理
• Double ended, equal area linear actuator with hydrostatic bearings for the best friction free static and dynamic performance, allows high side-loads and emergency running, integrated in machine’s base to shorten the force train.
• 雙作用等面積線形作動器，配有靜*承，能夠提供無摩擦靜態動態性能，允許帶側向荷載運行和緊急運行，作動器集成在機器底座以縮短傳力路徑。
• With integrated LVDT displacement transducer
• 內置LVDT位移傳感器
• Servovalve with manifold mounted direct on the actuator for the highest possible response and most accurate test control
• 伺服閥和閥板直接安裝在作動器上，可以實現高頻的響應和高精確的試驗控制
• Close coupled accumulators to minimize hydraulic pressure fluctuations and filter is mounted direct at the actuator
• 緊密耦合的蓄能器可以減小電液波動，同時過濾器也直接安裝在作動器上
• High precision fatigue rated flat load cell for static and fatigue tests fixed on upper crosshead

用于靜態和疲勞試驗的高精度疲勞級平板荷重傳感器安裝在上橫梁上

Technical data 技術數據

• Max. static test load                      ±250 kN
• zui大靜荷載                  ±250 kN
• Max. dynamic test load                 ±200 kN
• zui大動荷載                  ±200 kN
• Machine accuracy according to
  ISO 7500-1, ASTM E4
  from 2.5 kN to 250 kN                       Grade 0.5
  from 1.25 kN to 2.5 kN                     Grade 1
• 機器精確度符合ISO7500-1，ASTM E4標準

2.5kN ~ 250kN                  等級0.5

1.25kN~2.5kN                   等級1

• Piston Stroke                                100 (±50) mm
• 活塞行程                    100 (±50) mm

• Max. allowable piston speed         2 m/second
• 可允許的zui大活塞速度        2 m/second

• Clear distance between columns    650 mm
• 立柱間凈空                  650 mm

• Column diameter                            100 mm
• 立柱直徑                    100 mm

• Test chamber height                       0 to 1150 mm
  (distance between grips including alignment fixture)

試驗高度（夾具之間的距離）       0 到 1150 mm

• Stiffness of load frame
  at base / crosshead distance of 1000 mm                         1200 kN/mm
• 框架的剛度（底座至橫梁升到1000mm處 ）    1200kN/mm

• Stiffness of complete machine including 
  load cell and alignment fixture                     540 kN/mm

整機剛度（包括荷重傳感器和對中固定夾具）540 kN/mm

Approx. Dimensions尺寸等參數

• Working height (lower platen)       800 mm
• 工作臺高度                  800 mm
• Width                                             1048 mm

寬                                                   1048 mm

• Depth                                             600 mm
• 深度                                               600 mm
• Height                                            3125 mm
• 高度                                               3125 mm
• Weight                                           1920 kg
• 重量                                               1920 kg
• Colour pebble grey                        RAL 7032

or according your wish

• 顏色： 鵝卵石灰色或者根據客戶要求定制   RAL 7032

Manifold plate for two two-stage flow control servovalves Moog series 761, mounted direct at the actuator

2個Moog 761系列 2級伺服閥及閥板，直接安裝在作動器上

Features:特點

• With connecting points for pressure and return accumulator  (part of the delivery)
• 包含有壓和無壓返回蓄能器連接頭（部分交付）
• With flushing plates
• 包含平槽濾板
• (Optionally available platen for two Servovalves)

（可選雙伺服閥閥板）

High Responsive Moog two Stage Flow Control Servovalve with Mechanical Feedback Pilot Stage, Series 761

Moog761型帶機械反饋高響應2級伺服閥

Fatigue Rated Universal Flat Load Cell in low-profile, low mass design with precision base for accurate force measurement and control

疲勞級通用荷重傳感器，輕質的高精度底盤設計，于精確的力測量和控制

Features特點

• High suppression of disturbing components (bending moments, torque, lateral forces
• 高抗干擾組件（抗彎矩，扭矩，側向力）
• Rotational-symmetric design of the FE-optimised senor element
• ＦＥ優化傳感器元件具有旋轉對稱的設計
• Low-profile, robust construction  薄型堅固設計
• High natural frequency 很高的固有頻率
• Fatigue proof  很好疲勞性
• Excellent long term stability 優秀的*穩定性

Technical data技術參數

• Max. static test load                      ±250 kN
• zui大靜試驗荷載                           ±250 kN
• Max. dynamic test load                 ±200 kN
• zui大動試驗荷載
• Accuracy class                                0.02
• 精度等級                                       0.02
• Reproducibility error                      ±0.003%
• 重復性誤差                                   ±0.003%
• Linear error                                     ±0.015%
• 線形誤差                                       ±0.015%

• Hysteresis                                       ±0.02%
• 滯回                                               ±0.02%
• Influence of lateral forces              ±0.02% / 0.1Fnom
• 側向力影響                                   ±0.02% / 0.1Fnom
• Maximum lateral load                   ±* (static)
• zui大側向荷載                               ±* (靜態)
• Influence of torque Fnom              ±0.005% per mm
• 扭矩影響                                       ±0.005% per mm
• Eccentricity influence                   ±0.015% per mm
• 偏心影響                                       ±0.015% per mm
• Overload safe                                 150%
• zui大過載                                       150%
• Fatigue life min.                            One billion cycles
• zui小疲勞壽命                10億次循環
• Temperature effect on zero            0.001% /FS/°F
• 零點溫度影響                               0.001% /FS/°F

High Resolution Digital Material Testing Control System PCS8000

高分辨率數字材料試驗控制系統PCS8000

for static and dynamic material testing in closed loop load-, displacement-, deformation or external mode.

用于靜態和動態材料試驗的閉環加載，包括荷載、位移，變形或者外接控制模式。

The PCS system can be extended to accommodate multiple-channels of control, in connection with the free programmable software-package DION-PRO.

PCS系統配合可編程軟件包DION-PRO，可以擴展為多通道控制器。

Features 特點

• Control Channels                    1 (extendable)
• 控制通道                   1（可擴展）
• Control Modes                        any connected input
• (load, stroke, strain etc, or calculated variables with dumpless transfer)
• 控制模式                任何可連接的輸入                      
• （負載，行程，應變等，或者是計算變量）
• Close loop control rate            8000 Hz (8 kH)
  on all channels
• 所有通道閉環控制頻率     8000 Hz (8 kH)
• Internal data sampling rate    2 MHz
• 內部數據采樣率                  2 MHz
• Data transfer to the                8000 Hz (8 kH)
• computer/software on all channels
• 所有通道數據傳輸速率    8000 Hz (8 kH)
• Data acquisition / signal conditioners 24 bit
• 數據采集/信號調節位數         24 bit
• Control processor                    GP 64 bit
• 控制處理器              GP 64 bit
• Interfaces to PC                      Ethernet 10/100 Mbit
• 與電腦接口              Ethernet 10/100 Mbit

• Conditioners max.                  up to 13 (extendable)
  (including one digital channel on board)
  selectable according sensors and
  A/D inputs / D/A outputs
• 調理器zui大數量           可達13個（可擴展）

板上包含一個數字通道，可根據傳感器選擇和A/D輸入或者D/A輸出

• Transducer coding (SGS) with automatic recognitions of transducer and calibration
• 傳感器編碼系統可自動識別和校準傳感器
• Hardware complete with force, displacement and one on-specimen strain channel (amplifiers) and system plug
• 硬件可以接入力，位移和一個試樣應變通道（含放大器）

Including:包括

• Amplifier cards for force and displacement transducers
• 力和位移傳感器放大器板
• Set of cables, for force and displacement transducers, servovalve on or electromechanical drive etc
• 力、位移傳感器、伺服閥或者伺服機電驅動器等的電纜一套

• Including DION7EASYMODE  and DION7FPI  software packages

包含 DION7EASYMODE  和 DION7FPI 軟件包